SCHNORR DISC SPRINGS蝶形弹簧
SCHNORR®碟形弹簧DISC SPRING
动态过程碟形弹簧通常在极端力和负载条件下有效且可预测地支持动态过程。SCHNORR®碟形弹簧具有以下优势：
1、在较小的区域内承受较大的力。
2、在动态负载下可预测的使用寿命。
3、使用*上等的弹簧材料。
4、遵守力和尺寸规格。
原装SCHNORR®碟形弹簧的特征：
1、充分利用空间，弹簧载荷高，挠度小可组合使用串联和并联配置，以定制载荷挠度特性。
2、通过添加或拆卸单个弹簧来调节长度。
3、自我阻尼大，预设可在静态载荷下不进行设置。
4、在动态载荷下可预测的使用寿命，使用寿命长。
ORIGINAL SCHNORR®
DISC SPRINGS
Conical Shell
A disc spring is a conical shell which can be loaded along its axis either statically or dynamically.
Particular feature: “Highest load in the smallest space”
Effective January 2017 the familiar DIN standards for disc springs („DIN 2092-Calculation of Disc Springs“ and „DIN 2093-Quality requirements, Dimensions“) have been withdrawn.
These solely German standards have now been incorporated into European standards with the aim of securing the availability of high-quality standard disc springs for the whole world market.
- DIN EN 16983 – Quality requirements, Dimensions
- DIN EN 16984 – Calculation.
Dynamic Processes
Disc springs support dynamic processes efficiently and predictably: often under extreme force and load conditions.
Original SCHNORR® disc springs excel by:
- High force in a small area.
- Predictable service life under dynamic load.
- Use of highest quality spring materials.
- Adherence to force and dimension specification.
Materials with the highest tensile strength and utmost elasticity are required to make disc springs.
Materials for disc springs are principally supplied in the following forms:
Carbon Spring Steel per
DIN EN 10132-4
PER EN DIN 10123-4
C67S (1.1231) – Ref: AISI 1070
C75S (1.1248) – Ref: AISI 1078
Chrome Vanadium per
DIN EN 10151
PER EN DIN 10132-4
51CrV4 (1.8159) – Ref: AISI 6150
Corrosion Resistant Steel per
DIN EN 10151
PER DIN EN 10151
X10 CrNi 18-8 (1.4310) – Ref: AISI 30301
X7 CrNiAl 17-7 ( 1.4568) – Ref: AISI 631, 17-7 PH